A Guide to Wood Science
The Biological research of wood and it’s renewable material is what is referred to as wood science. Wood technology is now the way the tools are utilized in the processes of wood preservation. To be able to study wood it has to be compared to other products. The comparison made against other products will include the features of the material against those of wood, the value and the ease it can be worked on. Wood has many advantages and this technology takes the advantages and utilizes them. The wide range of products where wood can be used is just one of the many advantages that give wood an upper hand over other products. It is also based on renewable resources. Timber can be utilized in very many applications, and this makes it more valuable.
For your wooden products and house to stay for long and have a good appearance it needs to be protected. This protection is from moisture and insects which are the biggest threat to wood. The rotting and decay of the timber products are caused by the moisture and the insects. There are many ways timber is treated among them being the ACQ in other words alkaline copper Quaternary. As the name implies the preservative is made of copper products. As effective as this preservative, it has some downside to its use. It has been seen corroding most metals for example aluminum in less than six months of its application. The concentration of the chemical that will be used to treat a piece of wood will depend on the where it is going to be used and the molecular structure of the wood. Timber being used around a water body will be dipped in a more saturated fluid than that being used above ground.
Another wood treating method that is fast being accepted is the use of copper metal. The use of this method is fast being accepted because it is not corroding the metal fasteners. This process is what in other words called the micronized copper wood preservative. In this process microscopic particles of solid copper metal are mixed in a liquid carrier and injected to the wood at high pressure. In other copper-based preservation methods copper is dissolved in chemicals while in this method copper is driven into the wood as a metal. This process is highly effective and the wood properties and heightened. The timber treated in this way is used in both outdoor and indoor frames that last very long.
Termites and fungal decay are just a few among the many problems wood treated from this method are protected against. Unlike other methods of treatment this method is not corrosive. When you use this method to treat wood, then you will not need to worry for at least ten years.
Researched here: http://toddshupelsu.com/